Recovery Unit TRS21E A2L/A3 CPS

SKU: T1206023
Category: Recovery units
Manufacturers: CPS

Suitable for all FCKW, HFCKW and HFKW refrigerants including R32, R-1234yf, R600a, R290

834,00 €

incl. 20% VAT , plus (Paketdienst)

Old price: 985,03 €

In stock
Delivery time: 1 - 2 Workdays (AT - int. shipments may differ)

Recovery Unit TRS21E

The new CPS TRS21E Recovery Unit, is compact more than any other Recovery Unit, thanks to its new design without condenser and extra fan. Similar in design to a Vacuum Pump, this device is just as compact. The robust Construction of the Aluminum and Steel Housing guarantees a long Service Life, even in daily use. There is only one on/off Switch, so the technician cannot operate it incorrectly! Due to the oil-free double cylinder compressor, very high suction capacities are achieved. Both CFC, HCFC and HFC refrigerants including R410A can be extracted in gaseous and liquid states. Non-sparking design, so also suitable for R32, R-1234yf, R600a and R290 (A3 refrigerant taking precautionary measures when handling flammable refrigerants)

Characteristics:

Suitable for all refrigerants of class A1, A2L and A3 (take precautions into account)
TUV approval for R32 and HFO
Vapor or liquid recovery, including R-410A
Extremely compact and easy to transport; only 11 kg heavy!
2 cylinder piston compressor; Oil-free
Filtration: in the suction port
Permanently lubricated and sealed main bearings Improved piston seal design for less leakage and deeper vacuums
High pressure cut-off switch with LED display
Cleanable 100 mesh inlet filter
Highest recovery rates in its class
Ignition-safe ON-OFF switch
Sealed starter relay

The TRS21E is considered the strongest and fastest suction unit in its size and weight class!

Specifications:
Compressor: Oil-free; 2 Cylinder- Piston Compressor
Power supply - 220-240V / 50/60Hz
Surge Protection: 15 amps
Power Consumption 850W
Operating temperature ±0 to +49 °C
Safety pressure switch: 38 bar
Ergonomic design for easy handling
Incl. reusable dirt filter
Hardwired 3m power cord
Approved for A2L refrigerants including A1, R32, R-1234yf and R-1234ze
CE and TUV certified and tested and approved for use with A3 refrigerants. (A3 refrigerant taking precautions when handling flammable refrigerants)
Fastest ARI extraction rates in its class, (best speed-to-weight ratio in the industry)
Dimensions 300 x 150 x 230mm
Weight 11kg

Recovery Rates:
Refrigerant R410a
Direct Vapor: 0,319 kg/min (0,703 lb /min)
Direct Liquid: 5,42 kg/min (11,95 lb/min)
Push-Pull-Liquid: 14,38 kg/min (31,7 lb/min)
High Temp Vapor Rate: 0,37 kg/min (0,816 lb/min )

Refrigerant R22
Direct Vapor: 0,271 kg/min (0,597 lb/min)
Direct Liquid: 4,02 kg/min (8,86 lb/min)
Push-Pull-Liquid: 14,3 kg/min (31,53 lb/min)
High Temp Vapor Rate: 0,39 kg/min (0,86 lb/min)

Refrigerant R134a
Direct Vapor: 0,228 kg/min (0,503 lb /min)
Direct Liquid: 3,54 kg/min (7,8 lb/min)
Push-Pull-Liquid: 11,64 kg/min (25,66 lb/min)
High Temp Vapor Rate: n / A

Refrigerant R407C
Direct Vapor: 0,243 kg /min (0,536 lb /min)
Direct Liquid: 4,31 kg/min (9,50 lb/min)
Push-Pull-Liquid: 13,22 kg/min (29,14 lb/min)
High Temp Vapor Rate: n / A